Incidentally, all of our stock was originally built to have a FOV angle
of 80 degrees.
Unfortunately, TS only provides a default view angle of 65 degrees
which puts you very close to the windscreen in all our trains. To
change this angle you need to go into the Railworks folder and look for
the dev folder. This is the 5th folder down from the top. Open this and third one down is called scripts. Go into
this and find the enginescript lua file. You will need a text editor to open this. I use Notepad ++ which is free and you can find here.
notepad-plus-plus.org/Download and install it.
Now with a right click on the lua file you can select edit with Notepad++
Open it and change the FOV number in
both brackets and change to 80, then save and exit. Don't worry it will
only affect your District Line stock, not your other content.
You will now be sitting properly in the drivers seat and see much more of the
required panels and lights to your left particularly. Easier to see
overhead starter signals in certain locations too. All your other District stock will look much better too.