|
Post by kymriskadraken on Jun 15, 2021 16:08:59 GMT
I've tried to complete this scenario a number of times, but I always get signal issues on the Gunnersbury - Richmnond section.
* In the SB direction the home signal at Richmond (I can't remember its number) is always at Danger. There are no other trains around but the signal refuses to clear. Permission to pass at Danger is refused so I have to trip past it.
* In the NB direction the starter at Gunnersbury is also stuck at Danger. However permission to pass this one at Danger is granted.
Are there gremlins at work here?
Kev
|
|
|
Post by Eddie on Jun 15, 2021 23:50:30 GMT
Have you tried saving the scenario and then resuming with a reload. This is an old scenario that may be playing up with the new signals laid there in Phase 2.2. Having said that, no one else has reported it yet. So it may be an installation issue on your machine. Try this little trick as well. Go into the Content folder and find a file called SDBC Cache.bin When you find it delete it. Now, when your TS loads next time it will rebuild the Scenario Database and save it. It will take longer to load for that first time, but it can cure certain signalling issues like this in a scenario, on our route and many others too. Always a good idea to do this regularly if you install content.
|
|
|
Post by kymriskadraken on Jun 16, 2021 15:02:20 GMT
Have you tried saving the scenario and then resuming with a reload. This is an old scenario that may be playing up with the new signals laid there in Phase 2.2. Having said that, no one else has reported it yet. So it may be an installation issue on your machine. Try this little trick as well. Go into the Content folder and find a file called SDBC Cache.bin When you find it delete it. Now, when your TS loads next time it will rebuild the Scenario Database and save it. It will take longer to load for that first time, but it can cure certain signalling issues like this in a scenario, on our route and many others too. Always a good idea to do this regularly if you install content. I'll try the deletion and repoprt back next time I start the scenario. Kev
|
|