T/Op Man scenarios (Phase III) [edited repost]

Can you check to see if those are credited to the Virtual District Team Kev. You may need to go into the Scenario Editor and check the authors. If we wrote them, it will be credited to the Virtual District Team. The manual that shipped with the E.C pack wasn't updated to 3.1 ( there was only 1 tiny change made to an AI train ) The JT pack shouldn't affect anything.

I've removed and reinstalled Train Sim, DLCs and VDL Stage III but the problem has changed!



If I launch one of the T/Op Man S7 scenarios the train key doesn't open the cab. Normally when the key is turned the cab springs into life, but with these scenarios it doesn't. Met Line S7+1 work correctly, but the S7 repaints don't.



I have all of the rtequired DLC from Steam and the screenshot shows what else I have:





This is probably not a VDL problem, but any help would be appreciated.



Kev

OK update. You have to be careful in which order you install the JT stuff. Install the Met Line 106 and then the S7+1 Advanced 107 and only then install the Met Line enhancement pack 101. I just updated all my JT software and opened up the T/Op Man S7 WIM to ERD. It loaded fine and I could open up the cab with the master key just as usual.



bbcode image






Are you absolutely sure you installed the Met Enhancement Pack AFTER you installed the Met and the S7 ? cos it seems you corrupted your S7. I'd uninstall all 3 JT items and make sure you install them in the right order.

Thanks Eddie. I will delete the JT stuff and reinstall everytyhing.

The VDL I installed was the full installer at drive.google.com/file/d/1q6Wf0q4rviwd7pBgxZhukp8I6E6cpVyq/view


Kev

See if you can run the S7+1 on the Met first. The VDL route or scenario is not the issue. If you still have the issue with the Met then contact JT and open a support ticket. They are usually quite quick to respond. And let us know the outcome please. It may help someone else with the same issue. Did you disable any anti virus programs whilst you installed all that lot? Are you running TS as an admin ? You need to install everything with admin rights. Just pointing out what may be the issue. Are you running TS in 64 bit mode ?
BTW if you installed the full VDL installer, you didn't need the incremental 3.1 update, That could seriously mess things up. Delete the VDL route d59xxxxxx  and the Virtual District Team assets folder and re-install from the full installer ONLY. That is the 3.1 version.

Well.

I installed everything again, except Met Enhanced, and I can now set-up the trains. There is a known bug about the TMS screen showing the wrong destinations, but Celia (I thought she was called Sonia) knows where we are going.

I made a system restore point and then installed Met Enhanced and everything seems to be working.

It does seem as though it's very fussy about the installation order. The order that works from a clean install  is:

• TrainSim Classic from Steam (including Euro Com asset pack, US Com asset pack, GWML, London to Brighton and IoW)
• Metropolitan Line (Just Trains)
• S7+1 stock (Just Trains)
• VP Track Pack (Alan Thomson Sim)
• VP Track Pack expansion (Alan Thomson Sim)
• Virtual District Line Phase III
• UDL C69 + D78 repaint (Alan Thomson Sim)
• Circle Line Repaimt (Alan Thomson Sim)
• District Line Repaimt (Alan Thomson Sim)
  
• H&C Line Repaimt (Alan Thomson Sim)
• 1938 expansion (Steam)
• T/Op Man EC Scenario Pack
• Metropolitan Enhanced (Just Trains)

Thanks for the help in troubleshooting this. 


Kev