|
|
Post by atlutdkyle on Jul 16, 2023 21:10:08 GMT
![]() Whenever I start up a quick drive with the S7+1, all the doors open fine at the starting station. However, once I close the doors, the information screen on the left only shows the doors on the front car as blue for being locked. The rest of the cars on the train show the doors as red for unlocked. When I drive off and arrive at the next station, only the front doors will open. If I close the doors again, it shows all but the first car as being red for unlocked like before. This happens with both the stock JustTrains S7+1 as well as the District Line S7 from alanthomsonsim.com/downloads/district-line-s7-destinations/ Is there a way to get all the doors to operate properly?  |
|
|
|
Post by Jimi on Jul 16, 2023 23:25:12 GMT
Hadn't experienced that, but thanks for the detailed description and screenies. We'll pass this over to JustTrains and see if they have an answer. Did you use one of the standard consists? If so, which?
|
|
|
|
Post by Eddie on Aug 4, 2023 18:10:56 GMT
There is something you could try which sometimes fixes errors like this. Go into your Railworks Assets folder. Scroll down to Just Trains and find the S7+1 folder. Inside there you will find a file called Blueprints.pak Delete it. Don't worry Railworks will rebuild it. If you have uninstalled and re-installed the S7+1 a few times this file can sometimes get corrupted and cause issues like you describe. Also clear your Railworks cache from time to time from the settings/tools menu.
|
|
